China NSX 800 4P Moulded Case Circuit Breaker Manufacturer, Supplier, Factory

XUCKY Electric brand’s Jn17-12 Combined Grounding Switch is new circuit breakers which have been designed and developed by the company using international advanced technology. JN17-12/40 (old type is JN15-12/40) series indoor high voltage earthing switch is a new design and improved product of us according to the ESI type, the structure is assembled, suitable with electric power system with 3-10KV, Three-phase, AC 501601Hz, support with various kinds of HV switchgear and earthing protection. It is complied with GB1985-2004 and IEC129 standard.

XUCKY voltage protection device is an intelligent adjustable voltage and current protector. integrating overvoltage protection, undervoltage protection and overcurrent protection. Applicable to single-phase AC voltage 110V~240V, rated working frequency 50/60Hz, Maximum working current 63A. In case of over-voltage fault, under-voltage fault and over-current fault in the Live wire , this product can instantly cut off the power supply and protect the electrical equipment from burning. When the line returns to normal, the voltage protector can automatically reconnect the line. The overvoltage value, undervoltage value, overcurrent value and protection time of the product can be adjusted. It is mainly used for overvoltage/undervoltage protection of incoming lines of residential, photovoltaic and factory distribution boxes.

XUCKY Electric brand's FN12-12 series indoor high voltage air load break switch is a 3-phase AC 50Hz 12kV indoor switch equipment.
♦ Installation way: front-mounted, side mounted, flip mounted;
♦ Operating mechanism: spring operating mechanism, manual type and electrical type available;
♦ Operation type: right operation and left operation;
♦ Application: indoor 12kv switchgear.

JDZXW-35 type outdoor voltage transformer is a completely closed structure of epoxy resin vacuum pouring. It is suitable for voltage, power measurement and relay protection in power systems with rated frequency 50HZ, rated voltage 35KV and outdoor devices below. This type of voltage transformer is made by vacuum pouring of epoxy resin with arc resistance, ultraviolet resistance and aging resistance. The transformer does not need special maintenance, only need to regularly clean the surface dirt, due to the transformer is fully sealed pouring insulation, small volume, light weight, suitable for any position, any direction installation. The secondary outlet terminal of the transformer is sealed with a metal protective cover.

ZN85-40.5 series indoor high voltage vacuum circuit breaker is a 3-phase AC 50Hz 40.5kV indoor switch equipment.
♦ Installation way: withdrawable type;
♦ Operating mechanism: spring operating mechanism;
♦ Pole type: assembled pole, embedded pole;
♦ Application: switchgear KYN61-40.5.
♦ Secondary plug: 58pins, 64pins.

XUCKY Electric brand's VEF-12GD Side Installation Type 3 Working Position Vacuum Circuit Breaker Integrated, side installation, with disconnect switch, with earth switch (upper/lower earthing), interlocking mechanism integrated miniaturized
● 12KV, 630~1250A, 20~31.5KA
● For cabinet width 500mm
● Patented technology
● Solid sealing technology
● Outgoing terminal with non-contact charged display sensor
● The cabinet door block adjustment free