China Home Transfer Switch Manufacturer, Supplier, Factory

Support customized mass production DZ47-63 Miniature Circuit Breaker or called MCB is mainly used in the AC 50 / 60Hz, rated operating voltage of 230V / 400V and below, rated current of 63A circuit, the circuit breaker is mainly used in electrical wiring of modern buildings and overload, short circuit protection of equipment, also applies to infrequent operation and isolation of the line.

XUCKY Electric is CJ20 AC Contactor to Control Motors manufacturers and suppliers. CJ20 AC contactor (AC/DC contactor), mainly used in the circuit of AC 50Hz (or 60Hz), rated voltage to 660V, rated operating current to 630A, for long-distance making and breaking circuit, and combination with the appropriate thermal overload relay, to protect the circuit that operation may overload. AC/DC contactor meets standards of IEC60947-4-1, GB14048.4.

3kv-36kv Zinc Oxide Lightning Arrester is a device to protect electrical equipment from overvoltage transients caused by external (lightning) or internal (switching) events. Also called a surge protection device (SPD) or transient voltage surge suppressor (TVSS), this class of device is used to protect equipment in power transmission and distribution systems. (For consumer equipment protection, different products called surge protectors are used.) The energy criterion for various insulation material can be compared by impulse ratio, the surge arrester should have a low impulse ratio, so that a surge incident on the surge arrester may be bypassed, to the ground instead of passing through the apparatus.

China XUCKY Electric customized Intelligent AC Charging Pile is at the forefront of innovation with our Intelligent Charging Pile, a game-changing solution that embodies the future of electric vehicle (EV) charging. Tailored to meet the growing demand for sustainable and efficient charging infrastructure, our Smart Charging Pile integrates seamlessly into the evolving landscape of electric mobility.

Q3 Automatic Transfer Switch (hereinafter referred to as ATS), it is suitable for the power supply system of AC 50Hz, rated voltag f 400V, rated current of 63A and below. Choice and conversion between two power supply according to the needs. ATS have protection functions of overload, short circuit, under-voltage, but also have functions of fire, double breaking and output closing signal. Particularly applicable to the lighting lines in office buildings, shopping malls, banks, high-rise buildings and other places with needs of the fire.

Support customized mass production FN5-12 series indoor high voltage air load break switch (Hereinafter referred to as load break switch) applies to AC 50Hz 12kV network, for breaking load current and closing short circuit current. Load break switch with fuse can cut off short circuit current for switch protection. The load break switch can be used with CS6-1 type manual operating mechanism, and this product special uses CS manual operating mechanism.