China GN30-12/630 Rotary Indoor High Voltage Disconnect Manufacturer, Supplier, Factory

China XUCKY Electric customized JR20 Thermal Overload Relays are suitable for circuits with AC 50Hz, voltages up to 660V, and currents up to 630A, to protect against overload, phase failure and three phase unbalance of AC motor.

XUCKY M3DC series DC MCCB for PV is a safety device specifically designed for photovoltaic (PV) systems to protect circuits from over current and short-circuit conditions, is suitable for DC grid circuit with rated voltage up to DC1500V and rated current of 800A, used to distribute electric energy and protect circuit and the power supply equipment is protected from the danger of overload, short circuit, etc.

XUCKY Electric brand's XUW2-1600 Air Circuit Breaker
◆Featured with complete intelligence, high breaking capacity and zero arc;AC rated current 200A - 1600A, short circuit breaking capacity 20kA~55kA; It has 3 and 4 poles, draw-out type and fixed type, and can be installed with inverted wires;
◆With multiple intelligent controllers, providing different functions; intelligent function, display function
◆Setting function, monitoring function, fault memory function, available for communication interface for remote measurement, remote adjustment, remote control and remote communication;
◆With complete protection features, convenient setting and high accuracy, it has instantaneous, short delay, long delay, single-phase grounding and other protection characteristics.

XUCKY Electric is large-scale LC1-D AC Contactor manufacturer and supplier in China. For many years, we have been specializing in Modular Electrical Terminal Equipment, our products have good price advantage and cover most of the European and American markets. We are looking forward to being your long-term partner in China.

China XUCKY Electric customized LXK Current Transformer at 35kV and below. AC 50Hz line for the power system as well as the high voltage three-phase alternator, the motor's zero sequence over-current protection,and applies only to indoor. The outer diameter of the output cable is not greater than 120mm.
●This type of transformer is divided into two halves.Into a half circle type cast resin,and then clamping hoop connection.
●Installation can be mounted transformer is divided into two halves.Then merged into one,very easy to install.

XUCKY NDM1 Moulded Case Circuit Breaker (NDM1, hereinafter referred to as MCCB), is new circuit breakers which have been designed and developed by the company using international advanced technology. The circuit breakers are of the following characteristics: compact size, high breaking capacity, short arc-over distance and shakeproof, is ideal products applied on land or ships. The rated insulation voltage of the circuit breaker is 800V (500V for NDM1-63), it is suitable for the distribution network of AC 50Hz / 60Hz, rated working voltage of 690V and rated current of 1250A, to distribute power and protect circuit and power equipment from being damaged caused by overload , short-circuit, under-voltage and other fault. Also for protection infrequent conversion of the circuits and infrequent start of motor and overload, short circuit, under voltage.