GN30-12 Rotary Indoor High Voltage Disconnect

GN30-12 Rotary Indoor High Voltage Disconnect is a rotary touch knife type of new isolation switch, the main structure is in the three-phase under the base frame, the next two planes, fixed two groups of crepe and contact, by rotating the touch knife , In order to achieve the switch off the closing.

GN30-12 Rotary Indoor High Voltage Disconnect (indoor AC high voltage disconnector) for rated voltage 10kV, three-phase AC 50Hz power system as a voltage without the case of load, the use of sub-electrical appliances.

GN30-12 Rotary Indoor High Voltage Disconnect to meet the needs of different power systems, the product design performance is excellent, small footprint, strong insulation. Easy to install the adjustment, its performance in line with GB1985-89 "AC high voltage disconnector and grounding switch" requirements for rated voltage 12KV AC 50Hz and below indoor power system, as in the case of voltage without load, Circuit use. Can be used with high-voltage switchgear, can also be used alone.

The performance of this product in line with "AC high voltage disconnector and grounding switch" standard.

Model and meaning

Normal operating conditions and installation conditions

Altitude does not exceed 1000m;

Ambient air temperature; upper limit + 40 ° C; lower limit -10 ° C;

Relative humidity; daily average of not more than 95%, the average monthly maximum of 90%;

Tyrants intensity of not more than 8 degrees;

No serious dust chemical corrosive and explosive substances in the place;

There is no frequent severe vibration of the place.

Technical Parameters

Overall and lnstallation Dimensions