Products

China Voltage Protector Manufacturer, Supplier, Factory

We are looking forward to your buy Voltage Protector from our company made in China - XUCKY. Our factory is a Voltage Protector manufacturer and supplier in China. You are welcome to buy our high quality products.

Hot Products

  • LR9 Thermal Overload Relay

    LR9 Thermal Overload Relay

    Wholesale LR9 thermal overload relay manufacturer, 32A/690V, thermal setting range 6.4-32A, selectable tripping class 5-10-20-30, for protection of 3-phase motors 3-15KW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, buttons for test, stop and reset as well as manual-automatic reset selector, dipswitches for tripping class selection, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. With a large thermal setting range 6.4-32A, a selectable tripping class 5-10-20-30 and phase unbalance detection, it protects motors 3 to 11KW@400V. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D09-D38. Mounting on DIN rail or screw fixing, separated from contactor, with use of the terminal block LAD7B205 (to be ordered separately). Multi-standards certified (IEC, UL, CSA, CCC), Green Premium compliant (RoHs/Reach).
  • Voltage Protection Device

    Voltage Protection Device

    XUCKY voltage protection device is an intelligent adjustable voltage and current protector. integrating overvoltage protection, undervoltage protection and overcurrent protection. Applicable to single-phase AC voltage 110V~240V, rated working frequency 50/60Hz, Maximum working current 63A. In case of over-voltage fault, under-voltage fault and over-current fault in the Live wire , this product can instantly cut off the power supply and protect the electrical equipment from burning. When the line returns to normal, the voltage protector can automatically reconnect the line. The overvoltage value, undervoltage value, overcurrent value and protection time of the product can be adjusted. It is mainly used for overvoltage/undervoltage protection of incoming lines of residential, photovoltaic and factory distribution boxes.
  • M13 Moulded Case Circuit Breaker

    M13 Moulded Case Circuit Breaker

    Wholesale M13 Moulded Case Circuit Breaker manufacturer specialized in production and R&D M13 Molded Case Circuit Breaker (M13, hereinafter referred to as MCCB), is new circuit breakers which have been designed and developed by the company using international advanced technology. The circuit breakers are of the following characteristics: compact size, high breaking capacity, short arc-over distance and shakeproof, is ideal products applied on land or ships.
  • LXK Current Transformer

    LXK Current Transformer

    China XUCKY Electric customized LXK Current Transformer at 35kV and below. AC 50Hz line for the power system as well as the high voltage three-phase alternator, the motor's zero sequence over-current protection,and applies only to indoor. The outer diameter of the output cable is not greater than 120mm.
    ●This type of transformer is divided into two halves.Into a half circle type cast resin,and then clamping hoop connection.
    ●Installation can be mounted transformer is divided into two halves.Then merged into one,very easy to install.
  • L1-63 Residual Current Circuit Breaker

    L1-63 Residual Current Circuit Breaker

    L1-63 residual current circuit breakers are protection equipment which must be used to protect human life against dangerous electric shocks or prevent the fires arising out of isolation mistakes thereby detecting isolation mistakes to occur within the plant in advance. Sigma residual current circuit breakers are produced with 2 and 4 poles in accordance with IEC EN 61008-1 standard and in compliance with CE norms under ISO 9001:2008 quality assurance system.
  • ZW7-40.5 Series Outdoor High Voltage Vacuum Circuit Breaker

    ZW7-40.5 Series Outdoor High Voltage Vacuum Circuit Breaker

    ZW7-40.5 Series Outdoor High Voltage Vacuum Circuit Breaker is a 3-phase AC 50Hz 40.5kV outdoor switch equipment.
    ♦ Installation way: foundation installation;
    ♦ Operating mechanism: spring operating mechanism and electromagnetic operating mechanism;
    ♦ Pole material: silicone rubber, ceramic;
    ♦ Application: outdoor 33kV substation, power plant.
    ♦ Current transformer: in-buit installation, external installation.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept