China PV SPD DC Surge Protection Device Manufacturer, Supplier, Factory
We are looking forward to your buy PV SPD DC Surge Protection Device from our company made in China - XUCKY. Our factory is a PV SPD DC Surge Protection Device manufacturer and supplier in China. You are welcome to buy our high quality products.
China XUCKY Electric customized LXK Current Transformer at 35kV and below. AC 50Hz line for the power system as well as the high voltage three-phase alternator, the motor's zero sequence over-current protection,and applies only to indoor. The outer diameter of the output cable is not greater than 120mm.
●This type of transformer is divided into two halves.Into a half circle type cast resin,and then clamping hoop connection.
●Installation can be mounted transformer is divided into two halves.Then merged into one,very easy to install.
XUCKY Electric brand's VEF-12GD Side Installation Type 3 Working Position Vacuum Circuit Breaker Integrated, side installation, with disconnect switch, with earth switch (upper/lower earthing), interlocking mechanism integrated miniaturized
● 12KV, 630~1250A, 20~31.5KA
● For cabinet width 500mm
● Patented technology
● Solid sealing technology
● Outgoing terminal with non-contact charged display sensor
● The cabinet door block adjustment free
The arc fault detection devices AFDD (hereinafter referred to as AFDD) can effectively detect the fault arc in the access line, including the fault parallel arc and the fault series arc. When the fault arc causing fire is detected in the line, it can perform the function of disconnection and power-off to realize the purpose of early warning of fire. The arc fault dectection device is applicable to the electrical lines of 10kW and below in industrial and civil buildings. The length of the protection line should not be greater than 100m. The products comply with GB/t31143-2014 IEC62602 standard and can be applied to nursing homes, schools, commercial buildings, hotels, factories, warehouses, libraries, offices, family houses, and entertainment places.
XUCKY Electric brand's FN12-12 series indoor high voltage air load break switch is a 3-phase AC 50Hz 12kV indoor switch equipment.
♦ Installation way: front-mounted, side mounted, flip mounted;
♦ Operating mechanism: spring operating mechanism, manual type and electrical type available;
♦ Operation type: right operation and left operation;
♦ Application: indoor 12kv switchgear.
XUCKY Electric is a leading China manufacturer and exporter specializing in HT series waterproof distribution box. We have a wide range of products to meet the different needs of our customers worldwide. Our commitment to superior quality, innovative technology and excellent customer service makes us stand out in our industry. HT series waterproof distribution box is in line with IEC-493-1 standard, attractive and durable, safe and reliable, which is widely used in various places such as factory, mansion, residence, chapping center and so on.
China XUCKY Electric customized Intelligent AC Charging Pile is at the forefront of innovation with our Intelligent Charging Pile, a game-changing solution that embodies the future of electric vehicle (EV) charging. Tailored to meet the growing demand for sustainable and efficient charging infrastructure, our Smart Charging Pile integrates seamlessly into the evolving landscape of electric mobility.
The first difference between the load break switch and the isolation switch is that the load switch has an arc extinguishing device, and the isolation switch does not have such a device, so what is the difference between having this arc extinguishing device? The so-called arc extinguishing device is to be able to better help to switch the electrical disconnect and closure, but also to effectively limit the arc, to help the arc out. There is such a kind of arc extinguishing device, the switch electrical is more safe. So most of the switchgear inside is by the arc extinguishing device. Especially for household switching appliances.
Plastic case circuit breaker (using plastic insulator as the shell of the device) is also called a plastic case circuit breaker. It is suitable for use as a protection switch for branch circuits and can automatically cut off the current after the current exceeds the trip setting.
We are pleased to invite you to the 136th China Import and Export Fair (Canton Fair), which will be held from October 15th to 19th, 2023, at the Pazhou Exhibition Center in Guangzhou, China.
There are actually three main tripping methods for air circuit breakers. The first is electromagnetic tripping. The second type is thermal trip. The third type is compound tripping.
The arc extinguishing of AC contactor is easier than that of DC contactor because of the existence of zero crossing automatic arc extinguishing of AC current.
A current transformer is a crucial component in the efficient and safe operation of electrical systems. Its primary purpose is to step down high currents to lower, safer levels for measurement, monitoring, and protection.
Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces，a nice business partner.
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.
Privacy Policy
