Products

China Surge Protectors Manufacturer, Supplier, Factory

We are looking forward to your buy Surge Protectors from our company made in China - XUCKY. Our factory is a Surge Protectors manufacturer and supplier in China. You are welcome to buy our high quality products.

Hot Products

  • JR20 Thermal Overload Relay

    JR20 Thermal Overload Relay

    China XUCKY Electric customized JR20 Thermal Overload Relays are suitable for circuits with AC 50Hz, voltages up to 660V, and currents up to 630A, to protect against overload, phase failure and three phase unbalance of AC motor.
  • SPD Surge Protective Device

    SPD Surge Protective Device

    XUCKY SPD Surge protective Device, B, C, D series large current modular SPD Surge protective Device is used for power supply systems of AC 50/60Hz, the TT, IT, TN-S, TN-C, TN-C-S of rated voltage 380V and below, to protect the power grid caused by lightning or surge overvoltage. The design is based on the IEC61643-1, it can discharge the 100kA lightning current, case is installed on 35mm electric rail, the detachment device automatically will be out of its power grid, meanwhile the status indicator turns from green to red. SPD Surge protective Device has protection modes of common mode (MC) and differential mode (MD).
  • Voltage Protection Device

    Voltage Protection Device

    XUCKY voltage protection device is an intelligent adjustable voltage and current protector. integrating overvoltage protection, undervoltage protection and overcurrent protection. Applicable to single-phase AC voltage 110V~240V, rated working frequency 50/60Hz, Maximum working current 63A. In case of over-voltage fault, under-voltage fault and over-current fault in the Live wire , this product can instantly cut off the power supply and protect the electrical equipment from burning. When the line returns to normal, the voltage protector can automatically reconnect the line. The overvoltage value, undervoltage value, overcurrent value and protection time of the product can be adjusted. It is mainly used for overvoltage/undervoltage protection of incoming lines of residential, photovoltaic and factory distribution boxes.
  • L3-63 Residual Current Circuit Breaker

    L3-63 Residual Current Circuit Breaker

    The ID RCCB (Residual Current Circuit Breaker) and the F360 RCCB are two different models of L3-63 residual current circuit breakers, which are essential components in electrical systems designed to ensure safety by interrupting the circuit when an imbalance in current is detected, typically due to a ground fault or leakage current.
  • JSZVR Type Voltage Transformer

    JSZVR Type Voltage Transformer

    JSZVR type voltage transformer of epoxy resin cast insulated and totally-enclosed structure is intended for power measurement, current monitoring and relay protection in the line of up to 12 kV and AC 50-60 Hz.
    ●It is applicable to air insulated switchgear
    ●It conforms to GB1207 and lEC60044-2 standards
  • Three Phase Adjustable Voltage Protection Device

    Three Phase Adjustable Voltage Protection Device

    XUCKY Three phase adjustable voltage protection device,a new generation of home appliance protectors, suitable for houses, hotels, buildings, school dormitories, etc., to protect the electrical safety of appliances and other loads, to prevent damage to the load caused by too high or too low mains power.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept